Categories
Online Marketing

How We Make YouTube s: The Gear, Process, Kdenlive, Gimp, OBS & Other Open Source Software

So this is how I make youtube articles. I’ve actually gone through a lot of iterations, but because this is the first one I think I’ve documented top to bottom we’re going to call it version 1.0. When, technically, I have lost track of versioning, but for purposes of YouTube here and when I go back and say: okay, what did I change? I can make version, you know one point whatever or when I do a lot of changes.

Maybe a version to X, we’ll figure out like all projects that are open-source and you try to figure out what you’re going to do for versioning numbers and that can be the complicated part. Occasionally at least for me, because I think gives us a big change. An incremental change, but let’s get started. What we have here is, and I’m going to swap between the cameras and then I’m going to show how I actually put this article together on the editing side, and the reason I have to do both is because my youtube blog is obviously a lot of tutorials And some articles like this, so there’s a mix of things I do and I want to kind of show all of them.

So this part is the filming part is freely called filming. Nothing is film, it’s all digital, but this is the part where we do things in the studio and how we edit it together up. Here I have a GoPro just out of frame. Then we have two lights. I have my Aston microphone in shotgun mode, which is currently the audio source and I’m trying to figure out how to get the audio when I do behind here. I guess I’ll just be oh, so I have my aperture light and my cheap softbox from I well.

I think I got it either for me, I was on or ebay I’ll find an Amazon link for you. This is not an expensive one at all. That’s a little bit more money, but not excuse me that one’s a little bit more money, but I still really like it because it works really. Well, it’s an LED light. It’s portable. It’s got batteries on it, but now that we’re doing more studio stuff, I’m leaving these set up more often anyways.

So when we’re doing a product review, for example, I got a couple of products here. I got my pixel phone, which I’m getting get ready to do a review on. I currently have my GoPro mounted to a boom stand over here, and this boom stand works really good to hold a camera. Now I’ve Marvin’s camera’s, not here right now, I’ve been borrowing his 70d until I can decide whether or not a one of I another, seventy which I think I have a deal on a line on one right now, but that’s primary.

What we’re shooting with over there is the Canon 70d. I’m really happy to the camera everyone’s like. Oh, it doesn’t do 4k or doesn’t do this. I’m like. I don’t think my tutorials would be any better in 4k if they not adding any value, then yeah. Why even add it to there? Also we for the TV hookup, so we can see what we’re doing we have a wire going from that. So this is what I see over here. So kcci do glance over there.

Try never to look, but when we’re setting up this is an easy way for me to see. What’s going on is to look, we just plug it into the TV. I understand everything is going on with the camera and you know gives me a good idea of things on there now with the magic lantern software, it’s nice, because it gives me the audio level. So I can make sure the audio is good on this, and this asked a microphone I’ll leave a link to below I’m really happy with this purchase.

Now everyone’s, like. Oh rode, mic Pro this that I tried the rode mic I had the road might go. I liked it, but I liked the audio quality better on the Aston and it does stereo. So when we did that group setting where we had all of us here doing hot sauce, the acid microphone didn’t phenomenal job. We have it. This is also on a boom. Stand but I will show you that these lights here and the couple poles it’s all – I really need to get a lot of this done.

I am, though, prop maybe today I’ll do this. I didn’t like it I’m kind of getting sick of the orange behind us because I think it detracts from some of the colors, so we’re going to switch to just a gray background. We want to do maybe some color splashes that’ll be like a version 1.1. Changing the background is hardly a major change, but what’s important is the workflow and how this gets done and how the articles get produced.

So this is filming. That’s filming I’m going to splice in a little bit of filming off of this, so I can pull the whole project together and show you what’s going on, but I switch the camera on here right now or maybe I should do the GoPro I’ll do the GoPro. It’s got a better audio because I can put a microphone on the GoPro and I’ll walk around and kind of show you from the other side what this looks like.

So this is the aperture light. I know it’s kind of rigged in here that’s unfortunate, but we’re going to we’re going to put that inner right. That’s like! Shall we to do list? It’s got screw, it’s really solid, isn’t going where this is battery-powered. This is the aperture al5 tu es. So we can dial in if we need to do this, it’s on a tilts, it’s keep it plugged in. But if I unplug it like, I said it’s on battery, so you loses no brightness works really well.

This is the less expensive and hopefully the microphone doesn’t pick up too much noise shrimp. If I don’t get you close, this mic on the GoPro picks up a hum just generic cheap soft box from Amazon with for us and tubes in it, which is why it causes problems with this microphone. This I really like I’ll leave a link to this. This is the boom stand that we use for holding the camera up works really well, and this is one thing that’s really cool about this boom stand.

Let me break it down real quick and it drops down simple as that. Now it’s locked in place and then those legs fold up, so we can make it nice and small same with this. We hang the ear kind of up here when I’m not using it. That way, when we need more chairs and more places, which we keep the chairs all nice and neat kind of on the wall here. This is where all the extra gear ends up. So these are lots of connectors doodads.

There’s all our podcasting equipment, different ball heads. I really like these Joby heads they’re great, for holding things on this little case is where we put things like the GoPro and the other cameras. That’s how we do our time. Louses charging drone stuff the drones actually up there in shelf and when it’s all done, everything goes in here. We lock it that way when we have like get-togethers with random people coming in and out all the gear and all the little doodads.

No, I don’t want to be touching them. It is less I’m worried about people stealing it it’s much more, that people pick things up and touch it and lenses are super expensive, speaking of which that also brings me to this. This is my lenses, the Sigma 10 to 20, so this is for the real wide-angle shots. I really like this lens. I’ve had it for like ten years this, they call the Canon nifty 50. 50 millimeter.

It is a F 1.8. You can pick this lens up for like really cheap. It’s super inexpensive. I definitely like it quite a bit, but some of the other gears just miscellaneous stuff. You know lens cleaner stuff, like that. Maybe I’ll do a separate gear article. I do have a lapel mic in here and that’s what this is. I just don’t use it that often it’s kind of nice when you want to walk around and I get the microphone, but I don’t do that as much when I do.

These are the audio technica Pro 8 8 w RS pick these up for dirt cheap on eBay. I just dislike the fact that they use a 9-volt battery and they create a little bit of a history in the background so anytime I use it. I have to edit that out – and it annoys me, the Canon 70d itself is got the kit lens the 18 to 135, with the Image Stabilizer. We leave it off because it actually uses a little bit of battery when it’s on the tripod, but I use it.

Of course, if I’m trying to your free hand, which is pretty rare, free handing the camera unless you’re a really good camera man – which I am not that needed, so I try to tripod as much as I can. Even this has some shake now. This is just using HDMI out that goes up there. There’s your HDMI in the wall goes through. The ceiling comes back down behind the TV and it’s hard to see, but back there behind the TV is where all the lines come through to get that signal from over here to over there.

That’s simple effective though, and I like it here, is I dislike wires along the floor. If you didn’t notice, even these wires go plug in underneath and over here, so there’s nothing across our path. The only thing that kind of goes across the path is the audio cable. When I plug it into the Canon, but that’s life you’ve got a. I haven’t really found an easy solution, but that’s why we run it on this tall or boom stand from the Aston microphone up over back to the camera.

It’s easy enough for people to walk right under it, and this is that as tuned microphone, that has both the stereo and mono features low-pass filters. Some boosting the auto mode is my favorite because it automatically turns on when the camera turns on and it turns back off. So let’s turn all these things off and get to editing’s. That’s how we see where the open source comes into play and how holla’d all actually happens in case you’re wondering my GoPro setup, pretty simple: it’s a GoPro with one of them metal cages, a little hot shoe mount and the road might go and the stupid $ 50 GoPro adapter that you need to have to make this all work.

I have no idea. This is a cheap tripod that I bought all this off, Craigslist a guy who was just dumping it for really cheap – or at least this metal case. And this thing, so I don’t know what brand is some off-brand x-series, but it gets the job done for well doing what I just did with it. So it’s definitely handy for that. So for those of you see my desk before you know, I have a three desk layout, I’m going to jump to the other camera here and show you I zoom back out against the wall.

These are the three monitors, so everything’s kind of spread across all these screens, and now I’m going to insert that article into the article of me making the article now. This is actually could be showing me how to screw up making a article, because I added at the end of it and did a bunch of editing on how I did the editing and I don’t like the any of the ending of it. So I’m going back and re editing and Reese, placing just the ending of it.

I realized that I was a little bit too zoomed out trying to show three screens it’s how I edit and that didn’t portray well at all on YouTube. You just couldn’t see what I was doing, so I’m going back to dragging everything. So this is the three screen layout with well there’s different layouts here. This is a three screen layout. This is how my layout actually looks when it’s in process and then working.

This is a preview window on one side, but obviously this is really hard for you guys to see. What’s going on, I realized after I recorded me editing, but the article is edited, so I’m just going to cut out the end and redo that part. I tried it like this, and this is also hard to see what I’m doing so, we’re just going to drink everything to the middle screen and get rid of the webcam, so you can see what I’m doing for the editing parks this.

This is the hard part to show because there’s a lot that goes into editing, so I showed some of how I copied files and things like that, and that’s I thought maybe the interesting but maybe not imposed so I do is I’m done. I kind of proof most of my articles I try to prove from, but we’ll just bring over here and show you what I do so here is the editing part that I didn’t like this is going to get deleted.

Here’s all the stuff that came off of all the cameras I use so I had my GoPro. I had my screen capture, which I’m doing again right now, which was called. Finally, I just named it that you know my naming schema. That’s whatever makes it work for you, but what I will talk about is a couple little things, so one of them is – and I’ve talked about before I use sync thing: singing is backing up my article folder continuously, as I drop things in here.

I’ve did a whole article on that and whatever your workflow is making sure you have a solid backup. I like automated backups, specifically using the syncing tool and it backs up to my FreeNAS continuously, so it’s on my hard drive it’s backing up over to there. So that’s getting copied over then we just drag all these files, which I’m not going to direct them again, but you just drag them all in a kdenlive and then we drag them all to the tracks and I’m holding the ctrl key zooming in and out.

I got a tutorial on how to use Kate and live, and you know putting all this together now I started the intro of this article with a little classic 8-bit song. Let me see if I can change the view here so there’s my little preview that I dragged right there, so you can see going through editing the normally I edit on the other, monitor but, like I said, there’s not an easy way to 40-percent a dual monitor Layout it just unless you have a 4k and I export this at 4k.

You wouldn’t be able to read all this, but this is me cutting between all of them. You line up the audio, you get it all say: okay, here’s the audio! This is the GoPro article. This is the main camera article and it’s how I cut between them for the overhead shots and then I’m using OBS at the end, which I’ll drag my OBS screen over here, which it just goes to infinity, because it’s recording, OBS, recording, recording, OBS, recording and makes Kind of a cool effect in the background – and it OBS, is how I do my voiceover, so I got my setups here and this is what it looks like back on a three screen layout.

So let’s do this view. This is actually how it looks. I’ve Shrunk the screens over here, just going to give you guys an idea and a view, and all the voiceovers are recorded on a Yeti microphone in my little office with soundproofing here and very important soundproofing on the other side, because your voice goes this way. It reflects back so the back is to get rid of sound reflection at the back and the front and get rid of the sound reflection in front to kind of keep a dead area for the voice-over work.

But you know these tools are all free and open source and wonderful. Kdenlive is great OBS great cobia, cisco cross-platform, and someone will ask this kdenlive. I know they are working on a Windows version. Sorry, I’ve tried it that doesn’t work very well, it’s once it’s all done we’re going to render in process and then we jump over to GIMP and I have a template saved here in GIMP. That’s got the little black bar at the bottom and then I just go on the web and literally like the Canon 70d I typed in Canon 70d transparent there.

It is there I typed in Kaden, and these are just google image search while she this one didn’t need to be. I went to their website and it’s part of that’s their logo. Author header, I just grabbed it and you can actually just go copy image. Edit paste new layer – and you can get things added on there just like that and GIMP GIMP – is not as easy to use as Photoshop. It’s been a struggle because I’m a Photoshop guy, so I started learning it.

But if you started out, we get there’s some great tutorials you can find on it. I’m not good enough to make a tutorial on it, but I will tell you: I’ve been doing my thumbnails and everything for quite a while and editing the basics like what you’re seeing here in camp, and it’s worked out really well for me. So it definitely definitely can be done and once it’s all done, cuz GIMP saves in its own special format.

We file we export this and I called it how we make youtube articles, the gear and the process and the open source software and, like I said like going in-depth on the software, I have a tutorial on kdenlive already. I don’t really have one on OBS, but it’s maybe I’ll do one at some point. Obs feels almost self-explanatory. You just keep adding the different scenes like the webcam and then that’s what all these are.

Some are just microphones middle screen, webcam just left screen right screen. All my screens with me at the bottom and then you can just go here and if I want to put myself in the middle for this, but this is well technically. This is where I sit, because this is the the layout you’re seeing above is my three screen layout. That’s in here, so hopefully this was helpful kind of give you an idea how we do this.

I will leave links below to the tutorials. I have on how to use kdenlive how to get started with kdenlive in editing article. That’s probably the part break people find the most challenging recording stuff with OBS load it it’s pretty straightforward. Maybe I’ll do a specific tutorial on there, but OBS is a great way to do screen capture. I might do a specific review on a 7, but there’s a lot of mouths to die.

Cameras been around since 2013. So that’s it’s a I’m still happy with it’s a really great camera. I don’t really people like oh go, mirrorless yeah cool. Maybe I have the 70d. I don’t plan to replace it until it breaks. So, for now it’s a great camera and it’s not about the camera. It’s about coming up with teaching someone something the story, and the narrative is much more important. The tutorial the knowledge sharing is important.

1080 seems good enough for knowledge sharing, at least for me. For now, if my thought, my knowledge would look better in 4k great, I don’t have a 4k monitor and statistically most people don’t either. I know it supposed to be future thinking, but especially tech stuff. I have to keep producing because all this is completely irrelevant. Privation. That’s generally how it works. Hopefully, you found some of this helpful.

Give me an idea of behind the scenes how we produce YouTube articles, how this works. You know if you like to count in here like and subscribe. I will do my best to reply to all the comments. I’ve complained before about YouTube comments. Sucking I don’t see all the messages, it’s a YouTube thing. I’ve talked to other youtubers are the same problem. We also have the forums to help alleviate that over on Facebook links are below plus all the gear links and some of the details of all the stuff we use will be in here.

So hopefully this was helpful. I have a great day and enjoy get started on this open source. Editing if you’re interested in this I mean go, get these programs are free, start dabbling and playing and read my other kdenlive tutorials to get you started on this part of. It says the article edit, the press record, is easy. The editing I won’t lie. This is some this little effort that goes into this there’s a learning curve, but I think it’s worth it.

Thanks.


Videos are truly an awesome way to get the point across. Any type of content from your business is important!

 

Categories
Online Marketing

Vlogging: For beginners Part 29: SEO for YouTube – making YouTube s for beginners

Take a few seconds to load, but these things will actually help you with getting more viewers to your blog, but also help get them to view other articles on your blog. What would have to do is just wait for this to load up, but the first thing you want to see is like the matter beat 2016 in Spain.

So that’s my title, but is it a good title as a question? So if I copy that we go over to Google Adwords Keyword, planner you’ll have to set up an account. I think I only need a gmail account, but what you do is you’ll insert that phrase in here. The matter be 2016, spain and landing page will be that page with the article on it. So we want to go. Why are you okay? So, ideally I want to click on that.

I’ve just copied the link of this article within YouTube, you’ll see in the second one. I’ve changed page here, that’s where it is on YouTube. You just copy it out the browser’s just slightly out off the window at the top and this traveling tourism. So we go down a traveling tourism, just click it on that. You can actually go a bit further, but I’m just trying to do this quickly, so we tell it to go and get some ideas and what it’s doing is it’s searching for keywords that are relevant to those words and it will come back with some suggestions.

So here we are, you’ve got two ways to do this. The first one is the Apple II average month searches and then the other one is on price. So, as you can see here, this may only make and I’m sorry this one here and it makes one dollar 78 @ 1 pound 78, but it gets over 15,000 views so cost a blank is quite important. So the matter, costa blanca, would be a better phrase of word for a bigger monthly search.

But, as you can see here, more money does not mean more hits cuz. I didn’t see, there’s only two thousand there, but it’s two pounds 33. Using trip to this trip to Spain, now how you write it, you can pick out these keywords and you could do a search slight. If I clicked on suggested bid here, it should organize them into price fingers crossed roughly okay, no in here, okay, fair enough, but you get the idea you’re getting your monthly searches here.

Let’s click on there you go beach holiday gets 22 and a thousand. But obviously, that’s quite a broad search and you can play around with this to make it more precise. You can see that at the moment, Scott broadly related ideas, you could actually turn say well, hang on a minute only close to what I’m looking for save that I should actually update now with things are closer to what we’re actually searching for.

Okay, that was a bit too specific. He didn’t like it so we’ll change that it’s probably because it’s only got the 2016. It’s very specific, I suppose, if I took the 2016 out the search of poly work anyway, you get the idea there’s a lot of stuff within google adwords anyway, which you need to learn separately. We’re not going that in depth with it today. But what we’re going to do is concentrate on the keywords.

For example, costa blanca has another ten words hidden away here, so let’s just open up. If I click that it should open it out, so we can see the other 10 there you go, so you can see the other words in there. 14,800 of them are Kosta Blanco. Will aid costa blanca la motto is much lower. So the fact is what I would probably do is cost a blanket but still get picked up with we’re. Sorry, I put cost of lankan the matter, but it’ll still pick up Kosta Blanco anyway, because although it’s got the matter, what happens? Is it just sees that bit in the Google search anyway? So I’m not really fussed on that, but if we go back to our YouTube article, we’re now add Kosta, blanker lemaitre Beach 2016 Spade now you can see about all the key words here you see.

I picked up toya Becca already 2016, because I know these are things people looking for. They don’t want articles from five years ago, they’re looking for the latest ones, and here’s a few about Spanish life because obviously got the kids and wife with me. But if we go into the keyword planner, this is where you still find these words, because they’re still here cost uh Blanca beaches there’s another nice one doesn’t get a lot of searches, though so maybe I’ve got better something better put Kosta Blanco.

Actually, I didn’t put costa blanca in the keywords that I am on my tags, so I put that down here, see now I’ve added that that’s another good one. So that’s how you find your keywords and you slop them in not only on their in there, but also in the conversation. So what you want to try and do is put them in here naturally, so I’m could have rewrite this. But it’s difficult for me to talk and rewrite at the same time, but what you want to try and do is say: insert cost the Blanco into this conversation.

Lamotta beat sobs already in there could put. This is our first trip to the beach for 2016. Those sort of things would make this stand out a bit more and the number of words. Ideally you want in there it’s about 150 upwards. What about all those links people are put in back to their website their Twitter in them? I do that as well, but that’s predominantly because I’m trying to mix people when I first start the blog with my other websites and things because there’s more information, the stuff I’ve already talked about before which on those sites.

Ideally, if you slice huge, do that, because you’ve already got the traffic getting generated through the sheer volume of your subscribers. But if you’re just starting off you’re better off without any of extra stuff in there and concentrating on a good article. Almost because the these things get read by Google separately – and I know some people actually use their transcription from the text actually said in the article and then convert that into an article.

That’s fine as well, because it’s actually relevant it’s correct, but me walk along the beach. Obviously, it’s not going to be a lot of texts. There is there, because I’m just talking about the stuff that I see, but it it doesn’t translate into a good article. What does is talking about the beach in the sense that we’re going to the beach for the day, blah blah blah and ideally in life, says you want to focus on things that make your title stand out and I’m most relevant, make sure you’ve got at least 150 words, and it’s an article almost and the next thing is all your keywords.

Ideally, you do not want to sorry your tags, you don’t want any more than 10, so what I always do once I’ve actually prepared it. I quickly count 3. 4. 5. 6. 7. 8. 9. 10. 11. So I look at that and go okay. That will have to go. Google seem to like 10. I don’t know why it just does, and this is part of the SEO once you’ve done this bit. Just click on the save – you may even put your name in here because I know a lot of people search for my name so once that saved I’ll, just we’ll talk about something else, you’ve got these annotations cards.

Subtitles, let’s go here. We go to the subtitle. One first, with subtitles can closed captions. What you can do is translate it well, firstly, transcribe it into English or whatever language you are doing this article in and then you can get translated into other languages. It’s not going to be perfect, but at the same time the more is translated, the more chance you’ve got of meeting other subscribers, for example.

Here I am in spain. Obviously, I’ve got the entire Latin world that may be interested in Spain and some form. So from that point of view, it is worth translating this from english into spanish into russian, because we have a lot of russian tourists. Norwegian, Dutch, French, because we’re in a tourist area it is worth transcribing. Those google will have a tool for doing that now and I think they actually charge people for doing the translations.

But the main thing is to add new subtitles. You just put it on the side here. So let’s just click your english, united kingdom. I just wait for that to load. So then it will ask you: are you going to upload it? There is software out there can cover that end of the article actually to scram, transcribe and auto-sync, or create a new subtitles or closed caption. So, let’s click on this one transcribe and auto-sync.

This is where I’ll do it automatically? I think this one is the 1i. Normally is great new subtitle or closed caption, so what you have is the article is now going to load and you type the text as you hear it up here on the on the right. So as I speak, let’s find the word with me. Actually speaking so there’s the first bit we are down to the beach today and then all you do is click the plus and just check it in the right space.

So go back a little bit. You should let slide this back and it’s as simple as that. Once you’ve done all the article, you then save it, click, publish and away. You go. That’s something a lot of people don’t do, but it is quite useful for people that are hard of hearing or completely deaf, as well as people wanted to learn. I don’t know the language find it easier with subtitles, so there’s multiple reasons that this is quite a useful tool to use.

https://m.youtube.com/watch?v=OxP5oF8zA20

So we’ll leave that where it is at the moment and what we want to do is go over to cards because obviously I’m not going to sit and transcribe this entire article. While you SAT reading me so here’s cards, what is a card? So we know this article is about costa blanca LaMotta beach, and what you can do is add cards to it and now a card you can promote a article or playlist another blog. You could add a poll.

A link to an approved website so, like here, says spanish life and tourism. If I click on it, oh look, it’s my alicante, spain blog. It’s already been added to it. That’s a card and all you do. Is you just go ad card article? I playlist. I blog and then all you do, is you go up here? This is where my other blog is, when you load the blog for the main blog page, take the link out of the youtube window at the top, and then what you want to do is just drop it straight in here, then, you just put a custom message And that’s pretty much it and once once it’s in there you can see alicante spain blog and then it comes up with all the information relating to that blog, so that people aware they can go and have a look at it and get more information.

This is another useful way for getting people to hop onto other articles. Are the blogs, etc, etc, but it doesn’t just stop there we’re now going to go over to annotations so with this they’re actually inserted in the timeline, so I’m going to add an annotation. Let’s have a speech bubble type or no. Let’s have a note so we’ll leave that up there put it the shape you want and we’re going to link it to another article.

This article here is the pink lakes in Tribeca, so we can take that pink salt, lake’s silliness. Take that and then we’ll put that as the text. So people can actually click on that and it will take them to that article, which is obviously relevant to what the reading, because they’re, both in the matter toy, bear high area and we want to open in another article because I’m actually want them. To close this article down, but as you can see on the timeline, it’s only at the beginning here, so it’s a certain point.

It will actually switch off. So there is no like to try and let’s turn the audio, try and put it a near the beginning, but be let it go aways. They could click on that and i’ll open up in another window. They don’t actually have to close this one down, but they could all continue through the article and hopefully they’ve already opened it, but you could pull it the end. It could be other stuff relevant as you go along, for example, maybe i’ll well, it did.

I talked about the camper vans here you could put a link willing to camping in Spain or whatever, whatever you’ve got relevant. This is how you interweave your articles with each other, so that they’re all relevant with what you’re doing and make it more experience for the person subscribing and reading your articles, making it more interesting. So we’re just going to apply those changes. So now that is actually saves near the beginning, and if we go to enhancements or something it’s something we need to do on this, that’s pretty much it so we’ll go over to you can do some auto fixes and stuff it youtube can do some weird stuff To your article is now and again, though, as you can see, I’ve now changed to cross the blanket.

I did a cosplayer there, which is the main thing and obviously i’ve got these little bits added into the article. So we save that it’s already been done and we actually want to go and have a look at the article itself. So the article is now playing as you can see, I’ve turned the audio off for obvious reasons. There’s the bit we added earlier and up here on the right: we click on this one. It takes you to the other, candy blog they’re, not obtrusive.

This is the main thing these ads are at you too, but that’s part of getting you revenue, it’s nothing and do about that. But the the main thing is here: people can actually go. Oh I’ll, have a quick look at that and then pull it away out. The way it’s not in their face and the other one is not up there for ages, so you’re giving them more of an experience without actually having to do too much that is going to irritate.

Then you have all these bits and pieces. If I did the caption and translations, then obviously you should be able to see where I closed captions here, you can actually want to set up it’ll, actually give you the option to actually read it with the closed captions on all these things are very useful for Your YouTube blog – and I says you interweave it also you want to link in through your websites and stuff and which I’ll cover in another topic.

This is mainly just within YouTube. Thanks for reading